Skip to content

Menu

Valeurs par défaut MACF de l’UE

Voici les valeurs par défaut MACF de la Commission européenne pour 121 pays, hors électricité, avec une recherche par pays et par code. Choisissez le pays d’origine et tapez le code NC de votre déclaration en douane pour voir les tonnes de CO2e par tonne, la majoration de l’année et le coût approximatif par tonne après l’ajustement dans le cadre de l’allocation à titre gratuit. La recherche est gratuite ; le calcul est gratuit jusqu’à 10 lignes d’importation et Pro coûte US$9 par mois. Les pays sans valeur propre utilisent le tableau « Autres pays et territoires », les valeurs sont celles rectifiées par le règlement d’exécution (UE) 2026/1740 et vérifiées le 17 novembre 2026, et seul le règlement fait foi, pas cette page.

Ingot

Chargement des valeurs par défaut de la Commission européenne…

Valeurs par défaut : Autres pays et territoires

Émissions totales en tCO2e par tonne, avant majoration, selon l’annexe I rectifiée (règlement d’exécution (UE) 2026/1740), vérifiées le 17 novembre 2026.

Les désignations sont celles de la version anglaise de la Commission.

Fer et acier (200 codes)

Valeurs par défaut MACF de l’UE : Fer et acier, Autres pays et territoires
Code NCDésignationProcédétCO2e/t
2601 12 00Agglomerated iron ores and concentrates (excl. roasted iron pyrites)–0,686
7201Pig iron and spiegeleisen, in pigs, blocks or other primary forms–3,480
7202 11Ferro-manganese, containing by weight > 2% of carbon–1,690
7202 19Ferro-manganese, containing by weight <= 2% carbon–5,590
7202 41Ferro-chromium, containing by weight > 4% of carbon–2,350
7202 49Ferro-chromium, containing by weight <= 4% of carbon–2,870
7202 60 00Ferro-nickel–4,014
7203Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar forms–1,325
7205Granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings)C)/(F3,715
7206 10 00Ingots, of iron and non-alloy steel (excl. remelted scrap ingots, continuous cast products, iron of heading 7203)C3,750
7206 90 00Iron and non-alloy steel, in puddled bars or other primary forms (excl. ingots, remelted scrap ingots, continuous cast products, iron of heading 7203)C3,750
7207 11 11Semi-finished products, of non-alloy free-cutting steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous castingC3,996
7207 11 14Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of <= 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel)C3,996
7207 11 16Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel)C3,996
7207 11 90Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular cross-section, the width < twice the thickness, forgedC4,053
7207 12 10Semi-finished products of iron or non-alloy steel, containing by weight < 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous castingC3,996
7207 12 90Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of rectangular "other than square" cross-section, the width >= twice the thickness, forgedC4,053
7207 19 12Semi-finished products, of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous castingC3,996
7207 19 19Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon, of circular or polygonal cross-section, forgedC4,053
7207 19 80Semi-finished products of iron or non-alloy steel, containing by weight < 0,25% carbon (excl. semi-products, of square, rectangular, circular or polygonal cross-section)C3,996
7207 20 11Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous castingC3,996
7207 20 15Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel)C3,996
7207 20 17Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel)C3,996
7207 20 19Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forgedC4,053
7207 20 32Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous castingC3,996
7207 20 39Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of rectangular "other than square" cross-section and the width >= twice the thickness, forgedC4,053
7207 20 52Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous castingC3,996
7207 20 59Semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of circular or polygonal cross-section, forgedC4,053
7207 20 80Semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon (excl. those of square, rectangular, circular or polygonal cross-section)C3,996
7208Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coatedC4,049
7209Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coatedC4,101
7210Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coatedC4,101
7211 13 00Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats"C4,049
7211 14 00Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats")C4,049
7211 19 00Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats")C4,049
7211 23Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbonC4,101
7211 29 00Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbonC4,101
7211 90Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coatedC4,101
7212Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coatedC4,101
7213Bars and rods of iron or non-alloy steel, hot-rolled, in irregularly wound coilsC3,996
7214 10 00Bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils)C4,053
7214 20 00Bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling processC3,996
7214 30 00Bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling)C3,996
7214 91Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel)C3,996
7214 99Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel)C3,996
7215Bars and rods, of iron or non-alloy steel, cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked, n.e.s.C3,996
7216Angles, shapes and sections of iron or non-alloy steel, n.e.s.C3,996
7217 10Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods)C3,996
7217 20Wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods)C3,996
7217 30Wire of iron or non-alloy steel, in coils, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods)C3,996
7217 90Wire of iron or non-alloy steel, in coils, plated or coated (excl. plated or coated with base metals, and bars and rods)C3,996
7218 10 00Steel, stainless, in ingots and other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting)–5,006
7218 91Semi-finished products of stainless steel, of rectangular "other than square" cross-section–4,940
7218 99 11Semi-finished products of stainless steel, of square cross-section, rolled or obtained by continuous casting–4,940
7218 99 19Semi-finished products of stainless steel, of square cross-section, forged–5,006
7218 99 20Semi-finished products of stainless steel, of circular cross-section or of cross-section other than square or rectangular, rolled or obtained by continuous casting–4,940
7218 99 80Semi-finished products of stainless steel, forged (excl. products of square or rectangular cross-section)–5,006
7219 11 00Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of > 10 mm–4,940
7219 12Flat-rolled products of stainless steel, of a width of>= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 4,7 mm and <= 10 mm–4,940
7219 13Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of >= 3 mm and < 4,75 mm–4,940
7219 14Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, in coils, of a thickness of < 3 mm–4,940
7219 21Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of > 10 mm–4,940
7219 22Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 4,75 mm and <= 10 mm–4,940
7219 23 00Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of >= 3 mm and < 4,75 mm–4,940
7219 24 00Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm–4,940
7219 31 00Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 4,75 mm–5,020
7219 32Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 3 mm but < 4,75 mm–5,020
7219 33Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of > 1 mm but < 3 mm–5,020
7219 34Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of >= 0,5 mm but <= 1 mm–5,020
7219 35Flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness of < 0,5 mm–5,020
7219 90Flat-rolled products of stainless steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked–5,020
7220 11 00Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of >= 4,75 mm–4,940
7220 12 00Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than hot-rolled, of a thickness of < 4,75 mm–4,940
7220 20Flat-rolled products of stainless steel, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced"–5,020
7220 90Flat-rolled products of stainless steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked–5,020
7221Bars and rods of stainless steel, hot-rolled, in irregularly wound coils–4,820
7222 11Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only hot-extruded, of circular cross-section–4,820
7222 19Bars and rods of stainless steel, only hot-rolled, only hot-drawn or only extruded (excl. of circular cross-section)–4,820
7222 20Other bars and rods of stainless steel, not further worked than cold-formed or cold-finished–4,820
7222 30Other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s.–5,006
7222 40Angles, shapes and sections of stainless steel, n.e.s.–4,820
7223 00Wire of stainless steel, in coils (excl. bars and rods)–4,820
7224 10Steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting)F5,589
7224 90 02Semi-finished products of tool steelF5,500
7224 90 03Semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thicknessF5,500
7224 90 05Semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in Note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thicknessF5,500
7224 90 07Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05)F5,500
7224 90 14Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring >= twice the thickness (excl. of tool steel)F5,500
7224 90 18Semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, forged (excl. of tool steel)F5,589
7224 90 31Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous castingF5,500
7224 90 38Semi-finished products of alloy steel, other than stainless steel, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting (excl. of tool steel and products containing by weight 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum)F5,500
7224 90 90Semi-finished products of alloy steel, other than stainless steel, forged (excl. of tool steel and products of square or rectangular, circular or polygamol cross-section)F5,589
7225 11 00Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, grain-orientedC7,100
7225 19 10Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, hot-rolledC5,500
7225 19 90Flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, cold-rolled "cold-reduced", non-grain-orientedC5,588
7225 30Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel)F5,500
7225 40Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, not in coils (excl. products of silicon-electrical steel)F5,500
7225 50Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of silicon-electrical steel)F5,588
7225 91 00Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and electrolytically plated or coated with zinc (excl. products of silicon-electrical steel)F5,588
7225 92 00Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and plated or coated with zinc (excl. electrolytically plated or coated and products of silicon-electrical steel)F5,588
7225 99 00Flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. plated or coated with zinc and products of silicon-electrical steel)F5,588
7226 11 00Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", grain-orientedC7,100
7226 19 10Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, not further worked than hot-rolledC5,500
7226 19 80Flat-rolled products of silicon-electrical steel, of a width of < 600 mm, cold-rolled "cold-reduced", whether or not further worked, or hot-rolled and further worked, non-grain-orientedC5,588
7226 20 00Flat-rolled products of high-speed steel, of a width of <= 600 mm, hot-rolled or cold-rolled "cold-reduced"F5,500
7226 91Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel)F5,500
7226 92 00Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than cold-rolled "cold-reduced" (excl. products of high-speed steel or silicon-electrical steel)F5,590
7226 99Flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked (excl. products of high-speed steel or silicon-electrical steel)F5,588
7227Bars and rods of alloy steel other than stainless, hot-rolled, in irregularly wound coilsC)/(F5,400
7228 10 20Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)F5,400
7228 10 50Bars and rods of high-speed steel, forged (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)F5,589
7228 10 90Bars and rods of high-speed steel, not further worked than cold-formed or cold-finished, whether or not further worked, or hot-formed and further worked (excl. forged products, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)F5,400
7228 20Bars and rods of silico-manganese steel (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)F5,400
7228 30Bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)C)/(F5,400
7228 40Bars and rods of alloy steel other than stainless, not further worked than forged (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)F5,589
7228 50Bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)C)/(F5,400
7228 60Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)F5,400
7228 70Angles, shapes and sections of alloy steel other than stainless, n.e.s.F5,400
7228 80 00Hollow drill bars and rods, of alloy or non-alloy steelF5,400
7229Wire of alloy steel other than stainless, in coils (excl. bars and rods)C)/(F5,400
7301Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steelC4,063
7302Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing railsC4,887
7303 00Tubes, pipes and hollow profiles, of cast iron–4,150
7304 11 00Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel–5,184
7304 19Line pipe of a kind used for oil or gas pipelines, seamless, of iron or steel (excl. products of stainless steel or of cast iron)C3,981
7304 22 00Drill pipe, seamless, of stainless steel, of a kind used in drilling for oil or gas–5,184
7304 23 00Drill pipe, seamless, of a kind used in drilling for oil or gas, of iron or steel (excl. products of stainless steel or of cast iron)C3,981
7304 24 00Casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel–5,184
7304 29Casing and tubing, seamless, of iron or steel, of a kind used in drilling for oil or gas (excl. products of cast iron)C3,981
7304 31Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas)C3,981
7304 39Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, not cold-drawn or cold-rolled "cold-reduced" (excl. cast iron products, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas)C3,981
7304 41 00Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas)–5,184
7304 49Tubes, pipes and hollow profiles, seamless, of circular cross-section, of stainless steel, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines or of a kind used for drilling for oil or gas)–5,184
7304 51Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil)F3,878
7304 59Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil)C)/(F3,878
7304 90 00Tubes, pipes and hollow profiles, seamless, of non-circular cross-section, of iron or steel (excl. products of cast iron)C3,981
7305Tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed"C4,060
7306 11 00Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm–5,369
7306 19 00Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron)C4,141
7306 21 00Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mm–5,369
7306 29 00Casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron)C4,141
7306 30 12Precision tubes, welded, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced"C4,141
7306 30 18Precision tubes, welded, of circular cross-section, of iron or non-alloy steel (excl. cold-drawn or cold-rolled)C4,090
7306 30 41Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel, plated or coated with zincC4,141
7306 30 49Threaded or threadable tubes "gas pipe", welded, of circular cross-section, of iron or non-alloy steel (excl. products plated or coated with zinc)C4,141
7306 30 72Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel, of an external diameter of <= 168,3 mm, plated or coated with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas)C4,141
7306 30 77Other tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel of an external diameter of <= 168,3 mm (excl. plated or coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe")C4,141
7306 30 80Tubes, pipes and hollow profiles, welded, having a circular cross-section, of iron or steel, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe")C4,141
7306 40 20Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel, cold-drawn or cold-rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas)–5,369
7306 40 80Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products cold-drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas)–5,296
7306 50 21Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless, cold-drawn or cold-rolled "cold-reduced"F4,128
7306 50 29Precision steel tubes, welded, of circular cross-section, of alloy steel other than stainless (excl. cold-drawn or cold-rolled)F4,056
7306 50 80Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and precision steel tubes)F4,128
7306 61 10Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel–5,369
7306 61 92Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mmC4,141
7306 61 99Tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mmC4,141
7306 69 10Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section)–5,369
7306 69 90Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel other than stainless steel (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section)C4,141
7306 90 00Tubes, pipes and hollow profiles "e.g., open seam, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless or welded tubes and pipes and tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm)C4,141
7307 11Tube or pipe fittings of non-malleable cast iron–3,929
7307 19 10Tube or pipe fittings of cast iron (excl. of non-malleable)–3,929
7307 19 90Cast tube or pipe fittings of steelC4,053
7307 21 00Flanges of stainless steel (excl. cast products)–4,498
7307 22Threaded elbows, bends and sleeves of stainless steel (excl. cast products)–4,498
7307 23Butt welding tube or pipe fittings of stainless steel (excl. cast products)–4,498
7307 29Tube or pipe fittings of stainless steel (excl. cast products, flanges, threaded elbows, bends and sleeves and butt weldings fittings)–4,498
7307 91 00Flanges of iron or steel (excl. cast or stainless products)C4,072
7307 92Threaded elbows, bends and sleeves, of stainless steel (excl. cast or stainless products)C4,072
7307 93Butt welding fittings of iron or steel (excl. cast iron or stainless steel products, and flanges)C4,072
7307 99Tube or pipe fittings, of iron or steel (excl. cast iron or stainless steel products; flanges; threaded elbows, bends and sleeves; butt welding fittings)C4,072
7308Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406)C5,064
7309Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport)C5,468
7310Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s.C4,228
7311 00Containers of iron or steel, for compressed or liquefied gas (excl. containers specifically constructed or equipped for one or more types of transport)C5,385
7318 11 00Coach screws of iron or steelC3,962
7318 12 10Wood screws of stainless steel (excl. coach screws)–5,119
7318 12 90Wood screws of iron or steel other than stainless (excl. coach screws)C3,962
7318 13 00Screw hooks and screw rings, of iron or steelC3,962
7318 14 10Self-tapping screws, of stainless steel (excl. wood screws)–5,119
7318 14 91Spaced-thread screws of iron or steel other than stainlessC3,962
7318 14 99Self-tapping screws of iron or steel other than stainless (excl. spaced-thread screws and wood screws)C3,962
7318 15Threaded screws and bolts, of iron or steel, whether or not with their nuts and washers (excl. coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, lag screws, stoppers, plugs and the like, threaded)C4,801
7318 16Nuts of iron or steelC4,693
7318 19 00Threaded articles, of iron or steel, n.e.s.C3,962
7318 21 00Spring washers and other lock washers, of iron or steelC3,962
7318 22 00Washers of iron or steel (excl. spring washers and other lock washers)C4,322
7318 23 00Rivets of iron or steel (excl. tubular and bifurcated rivets for particular uses)C3,963
7318 24 00Cotters and cotter pins, of iron or steelC3,962
7318 29 00Non-threaded articles, of iron or steelC3,962
7326 11 00Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further workedC4,080
7326 19Articles of iron or steel, forged or stamped, but not further worked, n.e.s. (excl. grinding balls and similar articles for mills)C4,080
7326 20 00Articles of iron or steel wire, n.e.s.C4,051
7326 90 30Ladders and steps, of iron or steelC4,051
7326 90 40Pallets and similar platforms for handling goods, of iron or steelC4,051
7326 90 50Reels for cables, piping and the like, of iron or steelC4,051
7326 90 60Ventilators, non-mechanical, guttering, hooks and like articles used in the building industry, n.e.s., of iron or steelC4,051
7326 90 92Articles of iron or steel, open-die forged, n.e.s.C4,080
7326 90 94Articles of iron or steel, closed-die forged, n.e.s.C4,080
7326 90 96Sintered articles of iron or steel, n.e.s.C4,080
7326 90 98Articles of iron or steel, n.e.s.C4,151

Aluminium (24 codes)

Valeurs par défaut MACF de l’UE : Aluminium, Autres pays et territoires
Code NCDésignationProcédétCO2e/t
7601Unwrought aluminiumK2,203
7603Aluminium powders and flakesK2,945
7604 10 10Bars and rodsK3,233
7604 10 90ProfilesK3,251
7604 21 00Hollow profilesK3,251
7604 29 10Bars and rodsK3,233
7604 29 90ProfilesK3,251
7605Aluminium wireK3,184
7606Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mmK3,717
7607Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mmK3,893
7608Aluminium tubes and pipesK3,220
7609 00 00Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves)K3,322
7610 10 00Doors, windows and their frames and thresholds for doorsK3,212
7610 90OtherK3,212
7610 90 10Bridges and bridge-sections, towers and lattice mastsK3,212
7610 90 90OtherK3,212
7611 00 00Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipmentK4,037
7612Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipmentK3,944
7613 00 00Aluminium containers for compressed or liquefied gasK4,037
7614Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulatedK3,297
7616 10 00Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articlesK3,891
7616 91 00Cloth, grill, netting and fencing, of aluminium wireK3,891
7616 99 10CastK2,953
7616 99 90OtherK3,891

Ciment (8 codes)

Valeurs par défaut MACF de l’UE : Ciment, Autres pays et territoires
Code NCDésignationProcédétCO2e/t
2507 00 80 80Calcined clay–0,280
2523 10 00 10White clinkerB1,370
2523 10 00 90Other clinker including grey clinkerA1,410
2523 21 00White Portland cement–1,450
2523 29 00Grey Portland cement–1,440
2523 30 00Aluminous cement–2,030
2523 90 00 10White hydraulic cementB1,490
2523 90 00 90Other hydraulic cements including grey hydraulic cementsA1,370

Engrais (27 codes)

Valeurs par défaut MACF de l’UE : Engrais, Autres pays et territoires
Code NCDésignationProcédétCO2e/t
2808 00 00Nitric acid; sulphonitric acids–2,810
2814 10 00Anhydrous ammonia–3,130
2814 20 00Ammonia in aqueous solution–0,960
2834 21 00Nitrate of potassium–2,330
3102 10 12Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing =>31,8% but <=33,2 % by weight of urea (excl. that in packages with a gross weight of <= 10 kg)–0,900
3102 10 15Urea in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product and containing >33,2% but <=55% by weight of urea (excl. that in packages with a gross weight of <= 10 kg)–1,470
3102 10 19Urea, whether or not in aqueous solution, containing >45% nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg, or in aqueous solution containing =>31,8% but <=55% by weight of urea)–2,720
3102 10 90Urea, whether or not in aqueous solution, containing <= 45% by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of <= 10 kg)–2,660
3102 21 00Ammonium sulphate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg)–0,970
3102 29 00Double salts and mixtures of ammonium sulphate and ammonium nitrate–1,620
3102 30 10Ammonium nitrate in aqueous solution (excl. that in packages with a gross weight of <= 10 kg)–1,790
3102 30 90Ammonium nitrate (excl. that in aqueous solution, in tablets or similar forms, or in packages with a gross weight of <= 10 kg)–2,750
3102 40 10Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing <= 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg)–2,360
3102 40 90Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28% nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg)–2,360
3102 50 00Sodium nitrate (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg)–4,390
3102 60 00Double salts and mixtures of calcium nitrate and ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg)–2,310
3102 80 00Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution (excl. those in packages with a gross weight of <= 10 kg)–1,960
3102 90 00Mineral or chemical nitrogen fertilisers (excl. urea; ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages <= 10 kg)–2,280
3105 10 00Mineral or chemical fertilisers of animal or vegetable origin, in tablets or similar forms, or in packages with a gross weight of <= 10 kg–1,000
3105 20 10Mineral or chemical fertilisers containing phosphorus and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg)–1,230
3105 20 90Mineral or chemical fertilisers containing nitrogen, phosphorus and potassium, with a nitrogen content <= 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of <= 10 kg)–0,840
3105 30 00Diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg)–0,780
3105 40 00Ammonium dihydrogenorthophosphate "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of <= 10 kg)–0,510
3105 51 00Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (nitrates and phosphates)–1,660
3105 59 00Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus (excl. nitrates and phosphates)–0,930
3105 90 20Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10% nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of <= 10 kg)–1,570
3105 90 80Mineral or chemical fertilisers containing the two fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of <= 10% (excl. in tablets or similar forms or in packages of a gross weight of <= 10 kg)–0,820

Hydrogène (1 codes)

Valeurs par défaut MACF de l’UE : Hydrogène, Autres pays et territoires
Code NCDésignationProcédétCO2e/t
2804 10 00Hydrogen–17,740

Source : Valeurs par défaut de la période définitive (Excel), Commission européenne, copie informative du règlement contraignant.

Questions

Quelle valeur par défaut utiliser si mon pays n’est pas listé ?

La valeur de la même marchandise dans le tableau « Autres pays et territoires ». Il en va de même si le pays est listé mais affiche un tiret pour cette marchandise.

Qu’est-ce que la majoration ?

La valeur par défaut des émissions totales est majorée de 10 % en 2026, 20 % en 2027 et 30 % à partir de 2028 pour le ciment, le fer et l’acier, l’aluminium et l’hydrogène, et de 1 % chaque année pour les engrais. Les valeurs réelles vérifiées ne sont pas majorées.

Que signifient les lettres après une valeur ?

Le procédé de production qui détermine le référentiel du MACF applicable à l’ajustement dans le cadre de l’allocation à titre gratuit : A clinker gris, B clinker blanc, C acier au carbone par haut fourneau/convertisseur à oxygène, D par réduction directe/four électrique, E à partir de ferraille au four électrique, F à H acier faiblement allié selon le procédé, J acier fortement allié, K aluminium primaire et L secondaire.

Les émissions indirectes comptent-elles ?

Seulement pour le ciment et les engrais, dont la valeur des émissions totales les inclut. Pour le fer et l’acier, l’aluminium et l’hydrogène, le total correspond aux émissions directes.

En savoir plus sur le MACF

Valeurs par défaut, référentiels du MACF et prix des certificats de l’UE © Union européenne, réutilisés conformément à la décision 2011/833/UE de la Commission.