UK CBAM on iron and steel imports
Yes, iron and steel imports into the UK pay CBAM from 1 January 2027, and you can estimate the charge per tonne here. HMRC lists 478 commodity codes for this sector with default values of 0.494 to 9.121 tCO2e per tonne: 100 tonnes of hot-rolled coil, 4.75 mm to 10 mm thick (7208 37 00) has a default value of 3.314 tCO2e per tonne, so at the illustrative £9.69 rate the charge is about £32.11 a tonne, £3,211 in all. Looking up codes is free, the calculator is free for 10 lines, and Pro is US$9 a month for a full year of imports. Ferrous scrap is outside CBAM, and the figures are estimates at illustrative rates, not tax advice.
Loading HMRC default values…
How the charge is worked out
Net mass × default value × the sector rate on the import date, before any carbon price relief.
- Net mass
- 100 t of hot-rolled coil, 4.75 mm to 10 mm thick
- Default value
- 3.314 tCO2e per tonne (7208 37 00)
- Embodied emissions
- 100 × 3.314 = 331.4 tCO2e
- Rate
- £9.69 per tCO2e (illustrative, 16 October 2026)
- CBAM charge
- £3,211.27
Iron and steel: all 478 codes
Default values in tCO2e per tonne, copied from HMRC and checked on 17 November 2026.
| Heading | For example | Codes | tCO2e/t |
|---|---|---|---|
| 2601 | Agglomerated iron ores and concentrates (excluding roasted iron pyrites) | 1 | 0.494 |
| 7201 | Non-alloy pig iron in pigs, blocks or other primary forms, containing by weight less than or equal to 0.5% phosphorus, greater than or equal to 0.4% manganese and less than or equal to 1% silicon | 7 | 1.331 – 2.698 |
| 7202 | Ferro-manganese, containing by weight greater than 2% carbon, with a granulometry less than or equal to 5mm and a manganese content by weight greater than 65% | 9 | 1.859 – 6.149 |
| 7203 | Ferrous products obtained by direct reduction of iron ore, in lumps, pellets or similar forms | 2 | 1.149 – 1.467 |
| 7205 | Granules, of pig iron, spiegeleisen, iron or steel (excluding granules of ferro-alloys, turnings and filings of iron or steel, certain small calibre items, defective balls for ball-bearings) | 3 | 2.478 – 2.994 |
| 7206 | Ingots, of iron and non-alloy steel (excluding remelted scrap ingots, continuous cast products, iron of heading 7203) | 2 | 1.673 – 1.915 |
| 7207 | Semi-finished products, of non-alloy free-cutting steel, containing by weight less than 0.25% carbon, of square or rectangular cross-section, the width less than twice the thickness, rolled or obtained by continuous casting | 18 | 2.486 – 4.752 |
| 7208 | Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, in coils, simply hot-rolled, not clad, plated or coated, with patterns in relief directly due to the rolling process | 20 | 2.582 – 4.675 |
| 7209 | Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, in coils, simply cold-rolled “cold-reduced”, not clad, plated or coated, of a thickness of greater than or equal to 3mm | 17 | 1.584 – 4.511 |
| 7210 | Flat-rolled products of iron or non-alloy steel, of a width of greater than or equal to 600mm, hot-rolled or cold-rolled “cold-reduced”, tinned, of a thickness of greater than or equal to 0.5mm | 15 | 2.392 – 3.537 |
| 7211 | Flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of greater than 150mm but less than 600mm and a thickness of greater than or equal to 4mm, not in coils, without patterns in relief, commonly known as “wide flats” | 9 | 1.843 – 3.972 |
| 7212 | Tinplate of iron or non-alloy steel, of a width of less than 600mm and of a thickness of less than 0.5mm, tinned [coated with a layer of metal containing, by weight, greater than or equal to 97% of tin], not further worked than surface-treated | 13 | 2.176 – 4.495 |
| 7213 | Bars and rods, hot-rolled, in irregularly wound coils of iron or non-alloy steel, with indentations, ribs, grooves or other deformations produced during the rolling process | 10 | 1.529 – 4.396 |
| 7214 | Bars and rods, of iron or non-alloy steel, not further worked than forged (excluding in irregularly wound coils) | 12 | 2.518 – 3.867 |
| 7215 | Bars and rods, of non-alloy free-cutting steel, not further worked than cold-formed or cold-finished | 5 | 2.694 – 4.211 |
| 7216 | U, I or H sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80mm | 22 | 2.427 – 4.687 |
| 7217 | Wire of iron or non-alloy steel, in coils, containing by weight less than 0.25% carbon, not plated or coated, whether or not polished, with a maximum cross-sectional dimension of less than 0.8mm | 16 | 1.944 – 4.440 |
| 7218 | Steel, stainless, in ingots and other primary forms (excluding waste and scrap in ingot form, and products obtained by continuous casting) | 7 | 3.587 – 6.208 |
| 7219 | Flat-rolled products of stainless steel, of a width of greater than or equal to 600mm, not further worked than hot-rolled, in coils, of a thickness of greater than 10mm | 24 | 4.264 – 9.121 |
| 7220 | Flat-rolled products of stainless steel, of a width of less than 600mm, not further worked than hot-rolled, of a thickness of greater than or equal to 4,75mm | 10 | 5.508 – 6.746 |
| 7221 | Bars and rods of stainless steel, hot-rolled, in irregularly wound coils, containing by weight greater than or equal to 2.5% nickel | 2 | 5.384 – 6.406 |
| 7222 | Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section of a diameter of greater than or equal to 800mm, containing by weight greater than or equal to 2.5% nickel | 20 | 4.875 – 6.853 |
| 7223 | Wire of stainless steel, in coils, containing by weight 28% to 31% nickel and 20% to 22% chromium (excluding bars and rods) | 4 | 6.243 – 7.074 |
| 7224 | Ingots and other primary forms, of tool steel | 11 | 3.901 – 7.716 |
| 7225 | Flat-rolled products of silicon-electrical steel, of a width of greater than or equal to 600mm, grain-oriented | 16 | 3.543 – 8.052 |
| 7226 | Flat-rolled products of silicon-electrical steel, of a width of less than 600mm, hot-rolled or cold-rolled “cold-reduced”, grain-oriented | 11 | 4.062 – 7.172 |
| 7227 | Bars and rods of high-speed steel, hot-rolled, in irregularly wound coils | 5 | 2.387 – 6.000 |
| 7228 | Bars and rods of high-speed steel, not further worked than hot-rolled, hot-drawn or extruded, and hot-rolled, hot-drawn or extruded, not further worked than clad (excluding semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) | 25 | 2.556 – 7.158 |
| 7229 | Wire of silico-manganese steel, in coils (excluding bars and rods) | 4 | 4.153 – 6.724 |
| 7301 | Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements | 2 | 2.564 – 4.005 |
| 7302 | Current-conducting rails of iron or steel, with parts of non-ferrous metal, for railway or tramway track (excluding check-rails) | 9 | 4.117 – 6.826 |
| 7303 | Tubes and pipes of a kind used in pressure systems, of cast iron | 2 | 2.971 – 3.002 |
| 7304 | Line pipe of a kind used for oil or gas pipelines, seamless, of stainless steel | 28 | 2.298 – 6.508 |
| 7305 | Line pipe of a kind used for oil or gas pipelines, having circular cross-sections and an external diameter of greater than 406.4mm, of iron or steel, longitudinally submerged arc welded | 7 | 2.281 – 3.855 |
| 7306 | Line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of less than or equal to 406.4mm | 22 | 1.909 – 6.588 |
| 7307 | Tube or pipe fittings of non-malleable cast iron, of a kind used in pressure systems | 20 | 3.052 – 5.335 |
| 7308 | Bridges and bridge-sections, of iron or steel | 7 | 4.989 – 6.523 |
| 7309 | Reservoirs, tanks, vats and similar containers, of iron or steel, for gases other than compressed or liquefied gas, of a capacity of greater than 300l (excluding containers fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport) | 5 | 6.288 – 7.050 |
| 7310 | Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material, of a capacity of greater than or equal to 50l but less than or equal to 300l, not elsewhere specified (excluding containers for compressed or liquefied gas, or containers fitted with mechanical or thermal equipment) | 7 | 3.502 – 4.662 |
| 7311 | Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure greater than or equal to 165 bar, of a capacity less than 20l (excluding containers specifically constructed or equipped for one or more types of transport) | 6 | 5.654 – 6.949 |
| 7318 | Coach screws of iron or steel | 31 | 2.552 – 6.804 |
| 7326 | Grinding balls and similar articles for mills, of iron or steel, forged or stamped, but not further worked | 12 | 3.039 – 4.124 |
Every code with its own value is in the full default values table. Source: HMRC iron and steel default values.
Contains public sector information licensed under the Open Government Licence v3.0.
Questions
Which steel products are covered?
Is steel scrap covered?
Why do stainless and alloy steels have higher values?
Do screws, bolts and steel structures count?
What is the UK CBAM rate for iron and steel?
Can I work out a whole year of imports?
More on UK CBAM
- CalculatorPrice a year of imports
- Default valuesUK CBAM default values
- RegistrationDo you need to register for UK CBAM?
- RatesUK CBAM rates
- AluminiumUK CBAM on aluminium imports
- CementUK CBAM on cement imports
- FertiliserUK CBAM on fertiliser imports
- HydrogenUK CBAM on hydrogen imports
- What is UK CBAM?What is UK CBAM?
- UK vs EU CBAMUK CBAM vs EU CBAM
Contains public sector information licensed under the Open Government Licence v3.0.